Cangzhou Sanrong Environmental Protection Machinery Co

Type B sub-chamber side-spray back-blowing flat bag dust collector Type B sub-chamber side-spray back-blowing flat bag dust collector is the basis for our factory and many scientific research institutes to summarize the experience in using various bag dust collectors and absorb the advantages of similar products at home and abroad in recent years. New products designed on.
Product details
Product overview of Type B sub-chamber side-spraying back-blowing flat bag dust collector:
Type B-type sub-chamber side-spraying back-blowing flat bag dust collector is the product that our factory and many scientific research institutes have summarized in recent years. A new product designed based on experience in using various bag dust collectors and absorbing the advantages of similar products at home and abroad. It has the advantages of compact structure, simple and reliable dust cleaning method, convenient bag replacement and maintenance, high dust collection efficiency and long bag life. Especially due to the use of three-state back-blowing air in separate chambers for dust cleaning, it is not only simple in structure, but also uses the clean air inhaled for dust cleaning. There is no need to set up another mechanism to introduce the back-blowing air source, which saves energy and is simple to operate, significantly extending the filtration time. Bag life, thereby achieving safe and reliable operation, which is the outstanding feature of this series of products.
The working principle of the B-type sub-chamber side-spray back-blowing flat bag dust collector:
The entire equipment includes five parts, which are the injection device and bracket of the clean air box dust air box ash hopper.
Pure air box part: This part is equipped with a blow pipe, with a purge air outlet on the upper part, and an access door in front. When the access door is opened, any filter bag can be easily replaced.
Dust and gas part: The dust and gas inlet is located at the upper part of the air box part, and a filter bag is installed in the box.
Dust hopper part: After the dust gas enters the dust air box, the clean air passes through the filter bag and goes to the clean air box. The dust will settle into the ash hopper. And the settling direction is consistent with the air flow direction, which is conducive to the settling of dust. There is a partition between the clean air box and the dust air box. The size of the filter bag is a long, wide and thick rectangular flat filter bag.
The back-blowing device is installed under the clean air box, including the air bag pulse valve pulse controller, etc.
Type B sub-chamber side-spray back-blowing flat bag dust collector is generally operated by negative pressure. After the dusty air is sucked into the bag dust collector through the dust gas inlet, it will spread to the entire volume of the dust gas box part. The clean air passes through the filter bag, passes through the venturi tube at the mouth of the filter bag, reaches the clean air box, and is then discharged through the clean air outlet. The dust will be blocked outside the filter bag. Some of the dust can fall into the ash hopper by gravity, and some of it will be attached to the filter bag. When a large amount of dust is attached to the filter bag, the equipment resistance will increase. To maintain normal operation of the equipment, dust on the filter bags must be removed regularly. This dust collector adopts an advanced pulse back-blowing system. Compared with mechanical vibrating dust cleaning or low-pressure back-blowing dust cleaning, this method has a much better dust cleaning effect. It has no moving parts and can greatly reduce the maintenance workload.
Botou Sanrong Environmental Protection Machinery Co., Ltd.
Contact person: Wang Fengfeng